© 2024 Captain H2O Services LLC | Privacy

Products and Services

These vehicles require special attention to details with items like; decals, diamond plate surfaces, fittings and lights. As a result of using our system, we have reduced the damage that was being done by using the old methods of washing the apparatus.

Figure 1 & 2

A) Damage that occurs from the use of harsh truck brushes and improper drying with harsh towels.

B) Properly restored and protected area, as a result of Captain H2o Services LLC.

Apparatus Protection:

We offer many levels of protection: entry level wax, latest Silicone treatments and Ceramic coating. We specialize in public safety vehicles and are fully trained to operate. Certified and insured.

Apparatus Washing Flow Chart

Step 1:
  • Give the truck a good inspection of the surfaces. Look for oily road grime, which could require the use of more citrus based soaps to assist in a better cleaning.
  • Good through rinse, using pressure washer to remove any road contaminates, bugs and excess dirt.
Step 2:
  • Wash the truck with a neutral soap. Use the foam cannon to apply the soap on to the surface of the truck. Use a two bucket method when the truck is covered in heavy debris that you can't remove with just the spray method.
Step 3:
  • Blow dry the truck down using either electric or gas blower. This is the best method to remove water from all areasm cracks, handles and roll up doors.
  • Wipe down the truck using microfiber tower, soft towel and use some form of lubricant like spry wax / quick detailer.

Apparatus Washing Flow Chart

Step 1:
  • Give the truck a good inspection of the surfaces. Look for oily road grime, which could require the use of more citrus based soaps to assist in a better cleaning.
  • Good through rinse, using pressure washer to remove any road contaminates, bugs and excess dirt.
Step 2:
  • Wash the truck with a neutral soap. Use the foam cannon to apply the soap on to the surface of the truck. Use a two bucket method when the truck is covered in heavy debris that you can't remove with just the spray method.
Step 3:
  • Blow dry the truck down using either electric or gas blower. This is the best method to remove water from all areasm cracks, handles and roll up doors.
  • Wipe down the truck using microfiber tower, soft towel and use some form of lubricant like spry wax / quick detailer.

We have experieince working on and operating the following brands of emergency vehicles.

TYPE 3 RESCUE

H2O Suggested Preparation
Type 3 Rescue Vehicle

Quick Prep: Turn around time 3-4 hours - Call for Price

  1. Pressure Wash Vehicle initial rinse
  2. H2O foam wash
  3. Decontamination wash, bugs and other contaminates from factory/ road/ delivery.
  4. Blow dry and wipe vehicle down
  5. Application of Finish Detail spray
  6. Non-Silicone tire dressing, (no sling)
  7. Windows and interior cleaned BASIC
  8. Dressing apply to applicable interior items

Full Prep with Silicone 6 month treatment: - Call for Price (full day detail)

  1. Pressure Wash Vehicle initial rinse
  2. H2O foam wash
  3. Decontamination wash, iron x, removes any metal dust, bugs and other contaminates from factory/ road/ delivery
  4. Clay Bar Vehicle identifying any areas that might need correction. **prep for Silicone treatment
  5. Blow dry and wipe vehicle down with an IPA
  6. Application of Silicone Sealant
  7. Metal areas polished, diamond plating and Rims
  8. Non-Silicone tire dressing, (no sling)
  9. Windows and interior cleaned
  10. Dressing apply to applicable interior items

** Correction could add cost, if area needs more than just a quick one-step polish. This would be based on a hourly @$100 per hour. Compounding/ wet-sanding/ polish. Prices subject to change with advance notice.

CLASS A PUMPER

H2O Pre-Delivery Preparation
Class A Pumper

Quick Prep: Turn around time 3-4 hours - Call for Price

  1. Pressure Wash Vehicle initial rinse
  2. H2O foam wash
  3. Decontamination wash, bugs and other contaminates from factory/ road/ delivery
  4. Blow dry and wipe vehicle down
  5. Application of Finish Detail spray
  6. Non-Silicone tire dressing, (no sling)
  7. Windows and interior cleaned BASIC
  8. Dressing apply to applicable interior items

Full Prep with Silicone 6 month treatment: - Call for Price (full day detail)

  1. Pressure Wash Vehicle initial rinse
  2. H2O foam wash
  3. Decontamination wash, iron x, removes any metal dust, bugs and other contaminates from factory/ road/ delivery
  4. Clay Bar Vehicle identifying any areas that might need correction. **prep for Silicone treatment
  5. Blow dry and wipe vehicle down with an IPA
  6. Application of Silicone Sealant.
  7. Metal areas polished, diamond plating and Rims
  8. Non-Silicone tire dressing, (no sling)
  9. Windows and interior cleaned
  10. Dressing apply to applicable interior items

** Correction may incur additional costs on an hourly rate of $100 per hour and consist of compounding, wet-sanding, and/or polishing. Prices subject to change with advance notice

LADDER / PLATFORM

H2O Pre-Delivery Preparation
Ladder/Platform Vehicle

Quick Prep: Turn around time 4-5 hours - Call for Price

  1. Pressure Wash Vehicle initial rinse
  2. H2O foam wash
  3. Decontamination wash, bugs and other contaminates from factory/ road/ delivery
  4. Blow dry and wipe vehicle down
  5. Application of Finish Detail spray
  6. Non-Silicone tire dressing, (no sling)
  7. Windows and interior cleaned BASIC
  8. Dressing apply to applicable interior items

Full Prep with Silicone 6 month treatment: - Call for Price (full day and a half detail)

  1. Pressure Wash Vehicle initial rinse
  2. H2O foam wash
  3. Decontamination wash, iron x, removes any metal dust, bugs and other contaminates from factory/ road/ delivery
  4. Clay Bar Vehicle identifying any areas that might need correction. **prep for Silicone treatment
  5. Blow dry and wipe vehicle down with an IPA
  6. Application of Silicone Sealant.
  7. Metal areas polished, diamond plating and Rims
  8. Non-Silicone tire dressing, (no sling)
  9. Windows and interior cleaned
  10. Dressing apply to applicable interior items

** Correction could add cost, if area needs more than just a quick one-step polish. This would be based on a hourly @$100 per hour. Compounding/ wet-sanding/ polish. Prices subject to change with advance notice.

Contact us, we can help you maintain the fleet, through providing training, equipment or our detailing services.